JETech 2-Pack Screen Protector for iPad Air 5/4 10.9-Inch, iPad Pro 11-Inch All Models, Face ID Compatible, Tempered Glass Film
$11.50
Last updated on May 27, 2023 10:45 pm
- Compatible with Face ID and Apple Pencil. Designed for iPad Air 5/4 10.9-Inch, iPad Pro 11-inch All Models Liquid Retina Display. Fit iPad Models: A2435 A2761 A2762 A2588 A2589 A2591 A2301 A2459 A2460 A2377 A2228 A2068 A2230 A2231 A1979 A1980 A2013 A1934 A2324 A2072 A2316 A2325. Please check back bottom of your iPad to find the model numbe
- Made with high quality 0.33mm thick premium tempered glass with rounded edges
- Extremely high hardness: resists scratches up to 9H (harder than a knife); High-transparency and High sensitivity
- Dust-free, fingerprint-free, one-push super easy installation, bubble free
- Retail package includes: 2-Pack tempered glass screen protector, cleaning cloth, dust removal stick, guide stick, instructions
Specification: JETech 2-Pack Screen Protector for iPad Air 5/4 10.9-Inch, iPad Pro 11-Inch All Models, Face ID Compatible, Tempered Glass Film
|
13 reviews for JETech 2-Pack Screen Protector for iPad Air 5/4 10.9-Inch, iPad Pro 11-Inch All Models, Face ID Compatible, Tempered Glass Film
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
JETech 2-Pack Screen Protector for iPad Air 5/4 10.9-Inch, iPad Pro 11-Inch All Models, Face ID Compatible, Tempered Glass Film
$11.50
H L –
really easy to put on with attached instructions and can stand my scratching and writing! highly recommended!
Handyman –
Install was easy. Make sure that it is clean and dust free before applying the Tempered glass protector.
Make sure you put on a pair of clean gloves so that you don’t contaminate the iPad screen with your fingers oil marks.
Maria M –
Great quality product
Alan K –
I put this on my near new iPad Air Gen 5, it has about a 1mm gap all around the glass front which I am ok with as it has a bit of space to allow a Case which hugs the device not to interfere. I put an iPad Pro Smart Keyboard Folio on it which doesn’t hold the iPad like a Case would so I can’t confirm my theory (but it happened to a phone of mine, the protector was ruined (lifted up on the edge by slight movements of the case in use). I read the instructions (which were not the best) but then I watched the video which is accessed by the QR code, so I understood the process. Line it up correctly, use the hinge stickers to hold the protector in place, add a lifting sticker to stop you potentially touching the ‘sticky’ side later in the process, lift the protector off (still attached by the hinge stickers) clean the screen (wet wipe and a dry cloth provided – make sure its nice and clean), use a dust sticker to remove any dust. I took my time removing the dust with the iPad off, and I used a torch on the screen to make the dust more visible so I could remove it with the sticker. Once happy with the dust free screen, pull off the protective underside while vertical (to avoid any dust settling) use the hinges to line it back up onto the iPad, and run your finger lightly across the screen and watch it slowly stick down across the screen. I had two small areas that didn’t stick down in that first finger swipe so I used the provided soft edged cardboard rectangle to gently push the protector down in those spots from centre to towards the edge. It stuck to the screen perfectly with zero bubbles or dust on my first attempt! – a first for me (having had 4 other iPads, although 2 of them have plastic protectors rather than glass). So far so good, and happy with the result. Touch responds well, but I don’t have a pencil to test how it responds.
Mark Tilley –
Easy to install, looks great quality
Ozz J –
Very easy to install, provides good protection against scratches
Tech Know T –
I’ve used JETech screen protectors for a while now because the company is quite reputable and their screen protectors usually superb. I ordered this for my iPad Pro 2018. Installation was pretty easy, straight forward and didn’t take long at all. If you’re unsure how to apply the screen protector on properly there are lot’s of short Youtube tutorials. Be sure to clean your screen properly and use the sticky tab provided just to be sure it doesn’t developed air bubbles in the future.
This screen protector gives really good protection, it is fairly strong and durable. It is scratch resistant and will protect your screen if you drop something on it. If applied properly once it’s on you wont really notice it thanks to it high quality transparency. However during the day there is a considerable amount of glare when viewed at certain angles but it isn’t enough to be really annoying. The screen protector doesn’t interfere with your iPad Pro, you can use the touch screen and your iPad will still respond as normal. There is also a cutout for the Face ID camera and sensor and so theres no issues when logging in.
When it gets dirty from finger prints and dirt it is very easy to wipe and clean. Over all this is a good quality product however when using this with the Apple Pencil it doesn’t give a great experience. Compared to paper and even the iPad screen itself the screen feels a little too smooth to draw on with the Apple pencil. I’m now used to drawing on it and just make do but if you’re an artist then you’re most likely best off going for a screen protector with a matte finish. For everyone else this a great product that is good value for money and so I highly recommend it. Hope this helps.
Derek –
Item as described and comes fully loaded with all you need. Cloths as of a very decent large size, at least over half the screen size. Never had them as big before. All the alignment tapes are very sticky so no chance of coming adrift whilst using. I did have to remove protector quickly on first attempt as it was slightly misaligned, came off easily with a finger nail under a corner. Instructions are adequate enough for a simple operation, the link via the QR code shows how easy it is. Extremely happy. Highly recommended.
Leonheart –
The instruction was very clear.
I am really bad at putting tempered glass, but this time I can put the protector perfectly without any buble. Definitely recommend this protector
Tahir Rehan –
Very good quality. Some many accessories to help you install it perfectly. Cannot be any easier to install it.
Eghsabet –
This screen protector is easy to install if you use the typical method: peeling off the side as you stick the screen protector on the iPad. However, if you use their method with the stickers, it takes double the time and there’s a lot of dust that accumulates if you don’t stick in on quickly.
My first try I had hair stuck on my iPad screen because of that. With that said, I love the feel of the screen protector, it’s much easier to swipe on the iPad and much easier to clean my screen from finger spots. I would buy this again, despite the setup provided being not so great.
kCaj –
I would recommend this
Jodie –
I won’t use another screen protector brand after this one. The hinge stickers help install it strait and the dust stickers help for any air bubbles. It’s been on for months now and you wouldn’t know it’s on it’s so smooth. Also came with a spare.